The CP melt-blow cartridge is manufactured in the melt-blow process where by four different spray nozzles are used to combine fine and coarse continuous fibers to form a multilayer structure. The fine layers are situated on the inside of the depth filter structure; the coarse layers on the outside. Due to this four-level gradiation coarse particles are retained in the outer layers and finer particles in the inner layers. This construction ensures a long service life, high dirt-retention capacity and low differential pressures.

Features and Benefits：

Great chemical compatibility

High dirt-retention capacity  and long service life

Various adapters allowed and is easy to install and use

Made of 100% PP, no other additions

Technical data

Size ：

OD：                      φ60mm-φ130mm

ID：                       φ28mm，φ30mm

Length：                   10”，20”，30”，40”

Composition：

Filter media：              Polypropylene、Nylon fiber

Adaptor：                 Polypropylene

core support：             Polypropylene

Sealing Ring：              Silicone、EPDM、NBR、Viton

Feature：

PH ：                     1-13

Micron：                  1μm-100μ

Max Temperature：         80℃

Max Pressure difference：    0.2Mpa/25℃，0.1Mpa/80℃

Press chart:

Application:

Wine and water filtration

Pre-filters for reverse osmosis water

Filters in water-treatment

Industrial water and electroplating solution filtration.

Filtration of various organic solvents